Search for: All records

ABSTRACT We simulate shaking in Tacoma, Washington, and surrounding areas from Mw 6.5 and 7.0 earthquakes on the Tacoma fault. Ground motions are directly modeled up to 2.5 Hz using kinematic, finite-fault sources; a 3D seismic velocity model considering regional geology; and a model mesh with 30 m sampling at the ground surface. In addition, we explore how adjustments to the seismic velocity model affect predicted shaking over a range of periods. These adjustments include the addition of a region-specific geotechnical gradient, surface topography, and a fault damage zone. We find that the simulated shaking tends to be near estimates from empirical ground-motion models (GMMs). However, long-period (T = 5.0 s) shaking within the Tacoma basin is typically underpredicted by the GMMs. The fit between simulated and GMM-derived short-period (T = 0.5 s) shaking is significantly improved with the addition of the geotechnical gradient. From comparing different Mw 6.5 earthquake scenarios, we also find that the response of the Tacoma basin is sensitive to the azimuth of incoming seismic waves. In adding surface topography to the simulation, we find that average ground motion is similar to that produced from the nontopography model. However, shaking is often amplified at topographic highs and deamplified at topographic lows, and the wavefield undergoes extensive scattering. Adding a fault damage zone has the effect of amplifying short-period shaking adjacent to the fault, while reducing far-field shaking. Intermediate-period shaking is amplified within the Tacoma basin, likely due to enhanced surface-wave generation attributable to the fault damage zone waveguide. When applied in the same model, the topography and fault damage zone adjustments often enhance or reduce the effects of one another, adding further complexity to the wavefield. These results emphasize the importance of improving near-surface velocity model resolution as waveform simulations progress toward higher frequencies. 

ABSTRACT Earthquake-induced landslides can record information about the seismic shaking that generated them. In this study, we present new mapping, Light Detection and Ranging-derived roughness dating, and analysis of over 1000 deep-seated landslides from the Puget Lowlands of Washington, U.S.A., to probe the landscape for past Seattle fault earthquake information. With this new landslide inventory, we observe spatial and temporal evidence of landsliding related to the last major earthquake on the Seattle fault ∼1100 yr before present. We find spatial clusters of landslides that correlate with ground motions from recent 3D kinematic models of Seattle fault earthquakes. We also find temporal patterns in the landslide inventory that suggest earthquake-driven increases in landsliding. We compare the spatial and temporal landslide data with scenario-based ground motion models and find stronger evidence of the last major Seattle fault earthquake from this combined analysis than from spatial or temporal patterns alone. We also compare the landslide inventory with ground motions from different Seattle fault earthquake scenarios to determine the ground motion distributions that are most consistent with the landslide record. We find that earthquake scenarios that best match the clustering of ∼1100-year-old landslides produce the strongest shaking within a band that stretches from west to east across central Seattle as well as along the bluffs bordering the broader Puget Sound. Finally, we identify other landslide clusters (at 4.6–4.2 ka, 4.0–3.8 ka, 2.8–2.6 ka, and 2.2–2.0 ka) in the inventory which let us infer potential ground motions that may correspond to older Seattle fault earthquakes. Our method, which combines hindcasting of the surface response to the last major Seattle fault earthquake, using a roughness-aged landslide inventory with forecasts of modeled ground shaking from 3D seismic scenarios, showcases a powerful new approach to gleaning paleoseismic information from landscapes. 

Landslides are a significant hazard and dominant feature throughout the landscape of the Pacific Northwest. However, the hazard and risk posed by coseismic landslides triggered by great Cascadia Subduction Zone (CSZ) earthquakes is highly uncertain due to a lack of local and global data. Despite a wealth of other geologic evidence for past earthquakes on the Cascadia Subduction Zone, no landslides have been definitively linked to such earthquakes, even in areas otherwise highly susceptible to failure. While shallow landslides may not leave a lasting topographical signature in the landscape, there are thousands of deep-seated landslides in Cascadia, and these deposits often persist for hundreds of years and multiple earthquake cycles. Synthesizing newly developed inventories of dated large deep-seated landslides in the Oregon Coast Range, we use statistical methods to estimate the proportion of these types of landslides that could have been triggered during past great Cascadia Subduction Zone earthquakes. Statistical analysis of high-precision dendrochronology ages of landslide-dammed lakes and surface roughness-dated bedrock landslides reveal Cascadia Subduction Zone earthquakes may have triggered 0–15 % of large deep-seated landslides in the Oregon Coast Range over multiple earthquake cycles. Our results refine estimates from previous studies and further suggest that coseismic triggering accounts for a small fraction of the total deep-seated bedrock landslides mapped in coastal Cascadia. However, if the real rate of coseismic landslide triggering during CSZ earthquakes is near our estimated upper bound for the 1700 CSZ earthquake, we estimate up to 2400 coseismic large deep-seated landslides could occur in the Oregon Coast Range in a single earthquake. These findings suggest Cascadia is consistent with global observations from other subduction zones and that coseismic landslides may still represent a serious geohazard in the region.